Dynamic Design Solutions

The purpose of this project is to provide a series of semi-automatic machines for the assembly of an automotive door handle position sensor

The purpose of this machine is to assemble and test cabinet hinges.  This is the second successful hinge testing machine produced for the same application after the customer’s demand exceeded the capacity of the first machine built several years ago.

Project Description:

The purpose of this machine is to assemble and weld magnetic zipper fittings to continuous lengths of zipper fabric.

Project Description:

This machine is designed to press and heat coils to control the final dimensions of the generator coils. The coils are fabricated from many layers of copper and insulation and must be pressed and heated to control the overall coil dimension

Project Description:

This machine is designed to install O-rings and provide 100 percent visual inspection for automotive plastic bushings.

The purpose of this project is to design and build a machine that will assemble and inspect plastic caps.

The purpose of this project is to design and build a machine that will install parts into hinges.

The purpose of this project is to design and build a welding rework fixture that will help operators weld frames from various angles and positions.

The purpose of this project is to design and build a modular, flexible, simple to operate narrow web flexographic printing press.

The purpose of this project is to install a SCARA robot system to place literature on a pharmaceutical production line. The station will include a SCARA robot, a top loaded literature stack, and a frame that will be able to roll up next to an existing conveyor.